Technische specificaties Alinco DJ-596E2
- Frequency range E:TX & RX 144-145.995MHz 430-439.995MHz
- Operating mode F2(1200bps)/8K50F3E/16k0F3E/10F3(Op: digital)
- Channel steps 5, 10, 12.5, 15, 20, 25, 30KHz
- Memory channel 100 channels + 2 quick recall (CALL)
- Antenna Connector BNC (50ohm unbalanced)
- Frequency stability +/- 2.5ppm TCXO
-
Power supply requirement 6.0 - 15.0V DC negative ground Current drain
Approx. 1.2A TX VHF at 13.8V DC
Approx. 1.4A TX UHF at 13.8V DC
Approx. 75mA squelched
Approx. 25mA battery save ON - Usable temperature range -10 - +60c (14 - 140F)
- Dimensions (w/o projection EBP-50N battery included) 56mm(W) x 124mm(H) x 36.5mm(D) 2.2''(W) x 4.88"(H) x
- 1.44"(D)
- Weight Approx. 310g (11oz) with EBP-50N and EA98 whip antenna
- CTCSS tone encoder/decoder 39 tones
- Digital Coded Squelch encoder/decoder 104 codes
-
Transmitter Output power
Approx. 5W at 13.8V DC V/UHF
Approx. 4.5W VHF with 9.6V packs
Approx. 4.0W UHF with 9.6V packs
Approx. 2.5W V/UHF with EBP-56N
Approx. 0.8W Low position V/UHF - Modulation system Variable reactance frequency modulation
- Spurious emission Less than -60 dB
- Maximum frequency deviation +/- 5 KHz
- Receiver Receive system Double-conversion superheterodyne
- Sensitivity (-12dB SINAD) Less than -15.0dBu
- Selectivity -6dB: 12KHz or more -60dB: 30KHz or less
- Audio output power More than 200mW(8ohm 10%THD)
Bestel veilig en snel een Alinco portofoon op Radioamateurwinkel.nl!
